|
Powerglide
Bushings & Bearings
Product Search
|
Turbo Stator Support Bushing |
|
|
Item #APG-35007 |
Price: $1.99 |
|
Year 62-73
PG Turbo Stator Bushing Turbo input stator support bushing. This bushing fits in the end of the stator support to support the turbine in the torque converter. The OEM stator support must be bored to accept this bushing. Part Number APG-28154S Stator Support is pre-bored to accept this bushing. Do not use this bushing if your converter has a bushing in the cover to support the turbine. | |
|
|
|
|
Item #APG-8005 |
Price: $2.95 |
|
Babbitt front pump bushing. This bushing should be replaced any time the transmission is removed for service. |
|
|
|
|
Low Sun Gear Bushing (“Wedding Band”) |
|
|
Item #APG-8436 |
Price: $10.45 |
Year 62-73
PG 'Wedding Band" This is the splined bushing that slips over the rear of the input shaft and fits in the low sun gear. This bushing is often worn and should be replaced if it “hangs-up” on the input shaft. | |
|
|
|
|
High Drum Bushing, wide Teflon® |
|
|
Item #APG-77005T |
Price: $4.30 |
|
Year 62-73
PG Drum Bushing, Wide Teflon® Babbitt high drum bushing. This bushing is approximately .090” wider than the OE bushing and is coated with Teflon® for reduced friction and wear; recommended for all performance applications. | |
|
|
|
|
Item #APG-77005 |
Price: $3.40 |
|
Year 62-73
PG Front Drum Bushing, Wide Babbitt high drum bushing. This bushing is approximately .090” wider than the OE bushing, recommended for all performance applications. | |
|
|
|
|
Item #APG-28002 |
Price: $4.31 |
|
This is the bushing that fits in the rear of the case and
supports the output shaft. The case bushing can be identified
by an oil groove around the inside diameter of the bushing. |
|
|
|
|
Item #APG-K28901 |
Price: $16.95 |
Year 62-73
PG OEM Bushing Kit. This kit contains 1 each of the following: APG-8005 Pump Bushing, APG-35000A Drum Bushing, APG-28002 Case Bushing, APG-28001 Governor Support/Rear pump Bushing, and APG-8008 Extension Housing Bushing. Does not include Input Shaft Pilot Bushing or “Wedding Band” Recommended for OEM type rebuilds. | |
|
|
|
|
Bushing Kit, W/Wide Drum Bushing |
|
|
Item #APG-K28901A |
Price: $19.95 |
Year 62-73
PG Bushing Kit W/Wide Drum Bushing. This kit contains 1 each of the following: APG-8005 Pump Bushing, APG-77005 Drum Bushing, APG-28002 Case Bushing, APG-28001 Governor Support/Rear pump Bushing, and APG-8008 Extension Housing Bushing. Does not include Input Shaft Pilot Bushing or “Wedding Band”. Recommended for high performance applications. | |
|
|
|
|
Item #APG-1910Z0H |
Price: $9.87 |
|
Year 62-73
PG Case Bearing. Replaces the case bushing to reduce friction. The case needs to be machined to install this bearing. This serviced is offered by TSR. | |
|
|
|
|
Extension Housing Bushing, Bronze |
|
|
Item #APG-8008BR |
Price: $2.99 |
Year 62-73
PG Extension Housing Bushing, Bronze. Recommended for all high performance applications. | |
|
|
|
|
